Do you know that? 1 in 2 business will have online teams by 2020 next

See right interview answers on 30 common job interview questions


Collapse | Expand

1. Can a file other than a .h file be included with #include?

The preprocessor will include whatever file you specify in your #include statement. Therefore, if you have
the line

#include <macros.inc>

in your program, the file macros.inc will be included in your precompiled program.
It is, however, unusual programming practice to put any file that does not have a .h or .hpp extension in an
#include statement. You should always put a .h extension on any of your C files you are going to include.
This method makes it easier for you and others to identify which files are being used for preprocessing
purposes.

 

For instance, someone modifying or debugging your program might not know to look at the
macros.inc file for macro definitions. That person might try in vain by searching all files with .h extensions
and come up empty. If your file had been named macros.h, the search would have included the macros.h
file, and the searcher would have been able to see what macros you defined in it.

2. Can include files be nested?

Yes. Include files can be nested any number of times. As long as you use precautionary measures, you can avoid including the same file twice.
In the past, nesting header files was seen as bad programming practice, because it complicates the dependency
tracking function of the MAKE program and thus slows down compilation. Many of today's popular
compilers make up for this difficulty by implementing a concept called precompiled headers, in which all
headers and associated dependencies are stored in a precompiled state.

Many programmers like to create a custom header file that has #include statements for every header needed
for each module. This is perfectly acceptable and can help avoid potential problems relating to #include files,
such as accidentally omitting an #include file in a module.

3. Can you define which header file to include at compile time?

Yes. This can be done by using the #if, #else, and #endif preprocessor directives. For example, certain
compilers use different names for header files. One such case is between Borland C++, which uses the header
file alloc.h, and Microsoft C++, which uses the header file malloc.h. Both of these headers serve the same
purpose, and each contains roughly the same definitions. If, however, you are writing a program that is to
support Borland C++ and Microsoft C++, you must define which header to include at compile time. The
following example shows how this can be done:

#ifdef __BORLANDC__
#include <alloc.h>
#else
#include <malloc.h>
#endif

When you compile your program with Borland C++, the __BORLANDC__ symbolic name is automatically
defined by the compiler. You can use this predefined symbolic name to determine whether your program
is being compiled with Borland C++. If it is, you must include the alloc.h file rather than the malloc.h file.

4. How are portions of a program disabled in demo versions?

If you are distributing a demo version of your program, the preprocessor can be used to enable or disable
portions of your program. The following portion of code shows how this task is accomplished, using the
preprocessor directives #if and #endif:

int save_document(char* doc_name)
{
#if DEMO_VERSION
     printf("Sorry! You can't save documents using the DEMO version of
             this program!\n");
     return(0);
#endif
     ...
}

When you are compiling the demo version of your program, insert the line #define DEMO_VERSION and the
preprocessor will include the conditional code that you specified in the save_document() function. This
action prevents the users of your demo program from saving their documents.

As a better alternative, you could define DEMO_VERSION in your compiler options when compiling and avoid
having to change the source code for the program.

This technique can be applied to many different situations. For instance, you might be writing a program
that will support several operating systems or operating environments. You can create macros such as
WINDOWS_VER, UNIX_VER, and DOS_VER that direct the preprocessor as to what code to include in your program
depending on what operating system you are compiling for.

5. How can a program be made to print the line number where an error occurs?

The ANSI C standard includes a predefined macro named __LINE__ that can be used to insert the current
source code line number in your program. This can be a very valuable macro when it comes to debugging
your program and checking for logic errors. For instance, consider the following portion of code:

int print_document(char* doc_name, int destination)
{
     switch (destination)
     {
          case TO_FILE:
               print_to_file(doc_name);
               break;
          case TO_SCREEN:
               print_preview(doc_name);
               break;
          case TO_PRINTER:
               print_to_printer(doc_name);
               break;
          default:
               printf("Logic error on line number %d!\n", __LINE__);
               exit(1);
     }
}

If the function named print_document() is passed an erroneous argument for the destination parameter
(something other than TO_FILE, TO_SCREEN, and TO_PRINTER), the default case in the switch statement traps
this logic error and prints the line number in which it occurred. This capability can be a tremendous help
when you are trying to debug your program and track down what could be a very bad logic error.

6. How can a program be made to print the name of a source file where an error occurs?

The ANSI C standard includes a predefined macro named __FILE__ that can be used to insert the current
source code filename in your program. This macro, like the __LINE__ macro, can
be very valuable when it comes to debugging your program and checking for logic errors. For instance, the
following code, includes the filename as well as the line number when logic errors are trapped:

int print_document(char* doc_name, int destination)
{
     switch (destination)
     {
          case TO_FILE:
               print_to_file(doc_name);
               break;
          case TO_SCREEN:
               print_preview(doc_name);
               break;
          case TO_PRINTER:
               print_to_printer(doc_name);
               break;
          default:
               printf("Logic error on line number %d in the file %s!\n",
                         __LINE__, __FILE__);
               exit(1);
     }
}

Now, any erroneous values for the destination parameter can be trapped, and the offending source file and
line number can be printed.

7. How can type-insensitive macros be created?

A type-insensitive macro is a macro that performs the same basic operation on different data types. This task
can be accomplished by using the concatenation operator to create a call to a type-sensitive function based
on the parameter passed to the macro. The following program provides an example:

#include <stdio.h>
#define SORT(data_type) sort_ ## data_type
void sort_int(int** i);
void sort_long(long** l);
void sort_float(float** f);
void sort_string(char** s);
void main(void);
void main(void)
{
     int** ip;
     long** lp;
     float** fp;
     char** cp;
     ...
     sort(int)(ip);
     sort(long)(lp);
     sort(float)(fp);
     sort(char)(cp);
     ...
}

This program contains four functions to sort four different data types: int, long, float, and string (notice
that only the function prototypes are included for brevity). A macro named SORT was created to take the data
type passed to the macro and combine it with the sort_ string to form a valid function call that is appropriate
for the data type being sorted. Thus, the string

sort(int)(ip);

translates into

sort_int(ip);

after being run through the preprocessor.

8. How can you avoid including a header more than once?

One easy technique to avoid multiple inclusions of the same header is to use the #ifndef and #define
preprocessor directives. When you create a header for your program, you can #define a symbolic name that
is unique to that header. You can use the conditional preprocessor directive named  #ifndef to check whether
that symbolic name has already been assigned. If it is assigned, you should not include the header, because
it has already been preprocessed. If it is not defined, you should define it to avoid any further inclusions of
the header. The following header illustrates this technique:

#ifndef _FILENAME_H
#define _FILENAME_H
#define VER_NUM      "1.00.00"
#define REL_DATE     "08/01/94"
#if __WINDOWS__
#define OS_VER       "WINDOWS"
#else
#define OS_VER       "DOS"
#endif
#endif

When the preprocessor encounters this header, it first checks to see whether _FILENAME_H has been defined.
If it hasn't been defined, the header has not been included yet, and the  _FILENAME_H symbolic name is defined.
Then, the rest of the header is parsed until the last #endif is encountered, signaling the end of the conditional
#ifndef _FILENAME_H statement. Substitute the actual name of the header file for "FILENAME" in the
preceding example to make it applicable for your programs.

9. How can you be sure that a program follows the ANSI C standard?

The ANSI C standard provides a predefined symbol named __STDC__ that is set to 1 when the compiler is
enforcing strict ANSI standard conformance. If you want your programs to be 100 percent ANSI
conformant, you should ensure that the __STDC__ symbol is defined. If the program is being compiled with non-ANSI options, the __STDC__ symbol is undefined. The following code segment shows how this symbol
can be checked:

#ifdef __STDC__
     printf("Congratulations! You are conforming perfectly to the ANSI
             standards!\n");
#else
     printf("Shame on you, you nonconformist anti-ANSI rabble-rousing programmer!\n");
#endif

10. How can you check to see whether a symbol is defined?

You can use the #ifdef and #ifndef preprocessor directives to check whether a symbol has been defined
(#ifdef) or whether it has not been defined (#ifndef). Many programmers like to ensure that their own
version of NULL is defined, not someone else's. This task can be accomplished as shown here:

#ifdef NULL
#undef NULL
#endif
#define NULL (void*) 0

The first line, #ifdef NULL, checks to see whether the NULL symbol has been defined. If so, it is undefined
using #undef NULL and the new definition of NULL is defined.

To check whether a symbol has not been defined yet, you would use the #ifndef preprocessor directive.

11. How can you tell whether a program was compiled using C versus C++?

The ANSI standard for the C language defines a symbol named __cplusplus that is defined only when you
are compiling a C++ program. If you are compiling a C program, the __cplusplus symbol is undefined.
Therefore, you can check to see whether the C++ compiler has been invoked with the following method:

#ifdef __cplusplus                      /* Is __cplusplus defined? */
#define USING_C FALSE                   /* Yes, we are not using C */
#else
#define USING_C TRUE                    /* No, we are using C */
#endif

When the preprocessor is invoked, it sets  USING_C to FALSE if the  __cplusplus symbol is defined. Otherwise,
if __cplusplus is undefined, it sets USING_C to TRUE. Later in your program, you can check the value of the
USING_C constant to determine whether the C++ compiler is being used.

12. How do you override a defined macro?

You can use the #undef preprocessor directive to undefine (override) a previously defined macro. Many
programmers like to ensure that their applications are using their own terms when defining symbols such
as TRUE and FALSE. Your program can check to see whether these symbols have been defined already, and if
they have, you can override them with your own definitions of TRUE and FALSE. The following portion of
code shows how this task can be accomplished:

...
#ifdef TRUE             /* Check to see if TRUE has been defined yet */
#undef TRUE             /* If so, undefine it */
#endif
#define TRUE 1          /* Define TRUE the way we want it defined */
#ifdef FALSE            /* Check to see if FALSE has been defined yet */
#undef FALSE            /* If so, undefine it */
#endif
#define FALSE !TRUE     /* Define FALSE the way we want it defined */
...

In the preceding example, the symbols TRUE and FALSE are checked to see whether they have been defined
yet. If so, they are undefined, or overridden, using the #undef preprocessor directive, and they are redefined
in the desired manner. If you were to eliminate the  #undef statements in the preceding example, the compiler would warn you that you have multiple definitions of the same symbol. By using this technique, you can
avoid this warning and ensure that your programs are using valid symbol definitions.

13. How many levels deep can include files be nested?

Even though there is no limit to the number of levels of nested include files you can have, your compiler might
run out of stack space while trying to include an inordinately high number of files. This number varies
according to your hardware configuration and possibly your compiler.

In practice, although nesting include files is perfectly legal, you should avoid getting nest-crazy and purposely
implementing a large number of include levels. You should create an include level only where it makes sense,
such as creating one include file that has an #include statement for each header required by the module you
are working with.

14. Is it better to use a macro or a function?

The answer depends on the situation you are writing code for. Macros have the distinct advantage of being
more efficient (and faster) than functions, because their corresponding code is inserted directly into your
source code at the point where the macro is called. There is no overhead involved in using a macro like there
is in placing a call to a function. However, macros are generally small and cannot handle large, complex
coding constructs. A function is more suited for this type of situation. 

Additionally, macros are expanded inline, which means that the code is replicated for each occurrence of a macro. Your code therefore could
be somewhat larger when you use macros than if you were to use functions.

Thus, the choice between using a macro and using a function is one of deciding between the tradeoff of faster
program speed versus smaller program size. Generally, you should use macros to replace small, repeatable
code sections, and you should use functions for larger coding tasks that might require several lines of code.

15. What are the __DATE__ and __TIME__ preprocessor commands?

The __DATE__ macro is used to insert the current compilation date in the form "mm dd yyyy" into your
program. Similarly, the __TIME__ macro is used to insert the current compilation time in the form
"hh:mm:ss" into your program. This date-and-time-stamp feature should not be confused with the current
system date and time. Rather, these two macros enable you to keep track of the date and time your program
was last compiled. This feature can come in very handy when you are trying to track different versions of your
program. For instance, many programmers like to put a function in their programs that gives compilation
information as to when the current module was compiled. This task can be performed as shown here:

#include <stdio.h>
void main(void);
void print_version_info(void);
void main(void)
{
print_version_info();
}
void print_version_info(void)
{
     printf("Date Compiled: %s\n", __DATE__);
     printf("Time Compiled: %s\n", __TIME__);
}

In this example, the function print_version_info() is used to show the date and time stamp of the last time
this module was compiled.

16. What are the standard predefined macros?

The ANSI C standard defines six predefined macros for use in the C language:

 Macro Name Purpose
 __LINE__-Inserts the current source code line number in your code.
 __FILE__-Inserts the current source code filename in your code.
 __DATE__-Inserts the current date of compilation in your code.
 __TIME__-Inserts the current time of compilation in your code.
 __STDC__-Is set to 1 if you are enforcing strict ANSI C conformity.
 __cplusplus-Is defined if you are compiling a C++ program.

17. What is #line used for?

The #line preprocessor directive is used to reset the values of the __LINE__ and  __FILE__ symbols, respectively. This directive is commonly used in fourth-generation languages that generate C language source
files. For instance, if you are using a fourth-generation language named "X," the 4GL compiler will generate
C source code routines for compilation based on your 4GL source code. If errors are present in your 4GL
code, they can be mapped back to your 4GL source code by using the #line directive. The 4GL code
generator simply inserts a line like this into the generated C source:

#line 752, "XSOURCE.X"
void generated_code(void)
{
...
}

Now, if an error is detected anywhere in the generated_code() function, it can be mapped back to the
original 4GL source file named XSOURCE.X. This way, the 4GL compiler can report the 4GL source code
line that has the error in it.

When the  #line directive is used, the __LINE__ symbol is reset to the first argument after the #line keyword
(in the preceding example, 752), and the __FILE__ symbol is reset to the second argument after the #line
keyword (in the preceding example, "XSOURCE.X"). All references hereafter to the __LINE__ and __FILE__
symbols will reflect the reset values and not the original values of __LINE__ and __FILE__.

18. What is a macro, and how do you use it?

A macro is a preprocessor directive that provides a mechanism for token replacement in your source code.
Macros are created by using the #define statement. Here is an example of a macro:

#define VERSION_STAMP "1.02"

The macro being defined in this example is commonly referred to as a symbol. The symbol VERSION_STAMP
is simply a physical representation of the string  "1.02". When the  preprocessor is invoked, every
occurrence of the VERSION_STAMP symbol is replaced with the literal string "1.02".
Here is another example of a macro:

#define CUBE(x) ((x) * (x) * (x))

The macro being defined here is named CUBE, and it takes one argument, x. The rest of the code on the line
represents the body of the CUBE macro. Thus, the simplistic macro CUBE(x) will represent the more complex
expression ((x) * (x) * (x)). When the preprocessor is invoked, every instance of the macro CUBE(x) in
your program is replaced with the code ((x) * (x) * (x)).

Macros can save you many keystrokes when you are coding your program. They can also make your program
much more readable and reliable, because you enter a macro in one place and use it in potentially several
places. There is no overhead associated with macros, because the code that the macro represents is expanded
in-place, and no jump in your program is invoked. Additionally, the arguments are not type-sensitive, so you
don't have to worry about what data type you are passing to the macro.

Note that there must be no white space between your macro name and the parentheses containing the
argument definition. Also, you should enclose the body of the macro in parentheses to avoid possible
ambiguity regarding the translation of the macro. For instance, the following example shows the CUBE macro
defined incorrectly:

#define CUBE (x) x * x * x

You also should be careful with what is passed to a macro. For instance, a very common mistake is to pass
an incremented variable to a macro, as in the following example:

#include <stdio.h>
#define CUBE(x) (x*x*x)
void main(void);
void main(void)
{
     int x, y;
     x = 5;
     y = CUBE(++x);
     printf("y is %d\n", y);
}

What will y be equal to? You might be surprised to find out that y is not equal to 125 (the cubed value of
5) and not equal to 336 (6 * 7 * 8), but rather is 512. This is because the variable x is incremented while being
passed as a parameter to the macro. Thus, the expanded CUBE macro in the preceding example actually appears
as follows:

y = ((++x) * (++x) * (++x));

Each time x is referenced, it is incremented, so you wind up with a very different result from what you had
intended. Because x is referenced three times and you are using a prefix increment operator, x is actually 8
when the code is expanded. Thus, you wind up with the cubed value of 8 rather than 5. This common mistake
is one you should take note of because tracking down such bugs in your software can be a very frustrating
experience. I personally have seen this mistake made by people with many years of C programming under
their belts. I recommend that you type the example program and see for yourself how surprising the resulting
value (512) is.

Macros can also utilize special operators such as the stringizing operator (#) and the concatenation operator
(##). The stringizing operator can be used to convert macro parameters to quoted strings, as in the following
example:

#define DEBUG_VALUE(v) printf(#v " is equal to %d.\n", v)

In your program, you can check the value of a variable by invoking the DEBUG_VALUE macro:
...
int x = 20;
DEBUG_VALUE(x);
...

The preceding code prints "x is equal to 20." on-screen. This example shows that the stringizing operator
used with macros can be a very handy debugging tool.

The concatenation operator (##) is used to concatenate (combine) two separate strings into one single string.

19. What is a pragma?

The #pragma preprocessor directive allows each compiler to implement compiler-specific features that can
be turned on and off with the #pragma statement. For instance, your compiler might support a feature called
loop optimization. This feature can be invoked as a command-line option or as a #pragma directive. To
implement this option using the #pragma directive, you would put the following line into your code:

#pragma loop_opt(on)

Conversely, you can turn off loop optimization by inserting the following line into your code:

#pragma loop_opt(off)

Sometimes you might have a certain function that causes your compiler to produce a warning such as
Parameter  xxx is never used in function  yyy or some other warning that you are well aware of but choose
to ignore. You can temporarily disable this warning message on some compilers by using a #pragma directive
to turn off the warning message before the function and use another #pragma directive to turn it back on after
the function. For instance, consider the following example, in which the function named insert_record()
generates a warning message that has the unique ID of 100. You can temporarily disable this warning as
shown here:

#pragma warn -100    /* Turn off the warning message for warning #100 */
int insert_record(REC* r)   /* Body of the function insert_record() */
{
    /* insert_rec() function statements go here... */
}
#pragma warn +100 /* Turn the warning message for warning #100 back on */

Check your compiler's documentation for a list of #pragma directives. As stated earlier, each compiler's
implementation of this feature is different, and what works on one compiler almost certainly won't work on
another. Nevertheless, the #pragma directives can come in very handy when you're turning on and off some
of your compiler's favorite (or most annoying) features.

20. What is the benefit of using #define to declare a constant?

Using the #define method of declaring a constant enables you to declare a constant in one place and use it
throughout your program. This helps make your programs more maintainable, because you need to maintain
only the #define statement and not several instances of individual constants throughout your program. For
instance, if your program used the value of pi (approximately 3.14159) several times, you might want to
declare a constant for pi as follows:

#define PI 3.14159

This way, if you wanted to expand the precision of pi for more accuracy, you could change it in one place
rather than several places. Usually, it is best to put #define statements in an include file so that several
modules can use the same constant value.

Using the #define method of declaring a constant is probably the most familiar way of declaring constants
to traditional C programmers. Besides being the most common method of declaring constants, it also takes
up the least memory. Constants defined in this manner are simply placed directly into your source code, with
no variable space allocated in memory. Unfortunately, this is one reason why most debuggers cannot inspect
constants created using the #define method.

Constants defined with the #define method can also be overridden using the #undef preprocessor directive.
This means that if a symbol such as NULL is not defined the way you would like to see it defined, you can
remove the previous definition of  NULL and instantiate your own custom definition.

21. What is the benefit of using an enum rather than a #define constant?

The use of an enumeration constant (enum) has many advantages over using the traditional symbolic constant
style of  #define. These advantages include a lower maintenance requirement, improved program readability,
and better debugging capability. The first advantage is that enumerated constants are generated automati-
cally by the compiler. Conversely, symbolic constants must be manually assigned values by the programmer.
For instance, if you had an enumerated constant type for error codes that could occur in your program, your
enum definition could look something like this:

enum Error_Code
{
     OUT_OF_MEMORY,
     INSUFFICIENT_DISK_SPACE,
     LOGIC_ERROR,
     FILE_NOT_FOUND
};

In the preceding example, OUT_OF_MEMORY is automatically assigned the value of 0 (zero) by the compiler
because it appears first in the definition. The compiler then continues to automatically assign numbers to
the enumerated constants, making  INSUFFICIENT_DISK_SPACE equal to 1,  LOGIC_ERROR equal to 2, and so on.

If you were to approach the same example by using symbolic constants, your code would look something
like this:

#define OUT_OF_MEMORY 0

#define INSUFFICIENT_DISK_SPACE 1

#define LOGIC_ERROR 2

#define FILE_NOT_FOUND 3

Each of the two methods arrives at the same result: four constants assigned numeric values to represent error
codes. Consider the maintenance required, however, if you were to add two constants to represent the error
codes DRIVE_NOT_READY and CORRUPT_FILE. Using the enumeration constant method, you simply would put
these two constants anywhere in the enum definition. The compiler would generate two unique values for
these constants. Using the symbolic constant method, you would have to manually assign two new numbers
to these constants. Additionally, you would want to ensure that the numbers you assign to these constants
are unique. Because you don't have to worry about the actual values, defining your constants using the
enumerated method is easier than using the symbolic constant method. The enumerated method also helps
prevent accidentally reusing the same number for different constants.

Another advantage of using the enumeration constant method is that your programs are more readable and
thus can be understood better by others who might have to update your program later. For instance, consider
the following piece of code:

void copy_file(char* source_file_name, char* dest_file_name)
{
     ...
     Error_Code err;
     ...
      if (drive_ready() != TRUE)
          err = DRIVE_NOT_READY;
     ...
}

Looking at this example, you can derive from the definition of the variable err that err should be assigned
only numbers of the enumerated type Error_Code. Hence, if another programmer were to modify or add
functionality to this program, the programmer would know from the definition of  Error_Code what
constants are valid for assigning to err.

Conversely, if the same example were to be applied using the symbolic constant method, the code would look
like this:

void copy_file(char* source_file, char* dest_file)
{
     ...
     int err;
     ...
     if (drive_ready() != TRUE)
          err = DRIVE_NOT_READY;
     ...
}

Looking at the preceding example, a programmer modifying or adding functionality to the copy_file()
function would not immediately know what values are valid for assigning to the  err variable. The
programmer would need to search for the #define DRIVE_NOT_READY statement and hope that all relevant
constants are defined in the same header file. This could make maintenance more difficult than it needs to
be and make your programs harder to understand.

A third advantage to using enumeration constants is that some symbolic debuggers can print the value of an
enumeration constant. Conversely, most symbolic debuggers cannot print the value of a symbolic constant.
This can be an enormous help in debugging your program, because if your program is stopped at a line that
uses an enum, you can simply inspect that constant and instantly know its value. On the other hand, because
most debuggers cannot print #define values, you would most likely have to search for that value by manually
looking it up in a header file.

22. What is the benefit of using enum to declare a constant?

Using the enum keyword to define a constant can have several benefits. First, constants declared with enum
are automatically generated by the compiler, thereby relieving the programmer of manually assigning unique
values to each constant. Also, constants declared with enum tend to be more readable to the programmer,
because there is usually an enumerated type identifier associated with the constant's definition.

Additionally, enumerated constants can usually be inspected during a debugging session. This can be an
enormous benefit, especially when the alternative is having to manually look up the constant's value in a
header file. Unfortunately, using the enum method of declaring constants takes up slightly more memory
space than using the #define method of declaring constants, because a memory location must be set up to
store the constant.

Here is an example of an enumerated constant used for tracking errors in your program:

enum Error_Code
{
     OUT_OF_MEMORY,
     INSUFFICIENT_DISK_SPACE,
     LOGIC_ERROR,
     FILE_NOT_FOUND
};

23. What is the best way to comment out a section of code that contains comments?

Most C compilers offer two ways of putting comments in your program. The first method is to use the /*
and */ symbols to denote the beginning and end of a comment. Everything from the /* symbol to the */
symbol is considered a comment and is omitted from the compiled version of the program. This method is
best for commenting out sections of code that contain many comments. For instance, you can comment out
a paragraph containing comments like this:

/*
This portion of the program contains
a comment that is several lines long
and is not included in the compiled
version of the program.
*/

The other way to put comments in your program is to use the // symbol. Everything from the // symbol
to the end of the current line is omitted from the compiled version of the program. This method is best for
one-line comments, because the // symbol must be replicated for each line that you want to add a comment
to. The preceding example, which contains four lines of comments, would not be a good candidate for this
method of commenting, as demonstrated here:

// This portion of the program contains
// a comment that is several lines long
// and is not included in the compiled
// version of the program.

You should consider using the /* and */ method of commenting rather than the // method, because the
// method of commenting is not ANSI compatible. Many older compilers might not support the //
comments.

24. What is the concatenation operator?

The concatenation operator (##) is used to concatenate (combine) two separate strings into one single string.
The concatenation operator is often used in C macros, as the following program demonstrates:

#include <stdio.h>
#define SORT(x) sort_function ## x
void main(void);
void main(void)
{
     char* array;
     int   elements, element_size;
     ...
     SORT(3)(array, elements, element_size);
     ...
}

In the preceding example, the  SORT macro uses the concatenation operator to combine the strings
sort_function and whatever is passed in the parameter x. This means that the line

SORT(3)(array, elements, element_size);

is run through the preprocessor and is translated into the following line:

sort_function3(array, elements, element_size);

As you can see, the concatenation operator can come in handy when you do not know what function to call
until runtime. Using the concatenation operator, you can dynamically construct the name of the function
you want to call, as was done with the SORT macro.

25. What is the difference between #include and #include "file" ?

When writing your C program, you can include files in two ways. The first way is to surround the file you
want to include with the angled brackets < and >. This method of inclusion tells the preprocessor to look for
the file in the predefined default location. This predefined default location is often an INCLUDE environment
variable that denotes the path to your include files. For instance, given the INCLUDE variable

INCLUDE=C:\COMPILER\INCLUDE;S:\SOURCE\HEADERS;

using the  #include  version of file inclusion, the compiler first checks the C:\COMPILER\INCLUDE
directory for the specified file. If the file is not found there, the compiler then checks the
S:\SOURCE\HEADERS directory. If the file is still not found, the preprocessor checks the current
directory.

The second way to include files is to surround the file you want to include with double quotation marks. This
method of inclusion tells the preprocessor to look for the file in the current directory first, then look for it
in the predefined locations you have set up. Using the  #include "file" version of file inclusion and applying
it to the preceding example, the preprocessor first checks the current directory for the specified file. If the
file is not found in the current directory, the C:\COMPILER\INCLUDE directory is searched. If the file
is still not found, the preprocessor checks the S:\SOURCE\HEADERS directory.

The #include <file> method of file inclusion is often used to include standard headers such as stdio.h or
stdlib.h. This is because these headers are rarely (if ever) modified, and they should always be read from your
compiler's standard include file directory. 

The #include "file" method of file inclusion is often used to
include nonstandard header files that you have created for use in your program. This is because these headers
are often modified in the current directory, and you will want the preprocessor to use your newly modified
version of the header rather than the older, unmodified version.

26. What will the preprocessor do for a program?

The C preprocessor is used to modify your program according to the preprocessor directives in your source
code. A preprocessor directive is a statement (such as #define) that gives the preprocessor specific instructions
on how to modify your source code. The preprocessor is invoked as the first part of your compiler program's
compilation step. It is usually hidden from the programmer because it is run automatically by the compiler.

The preprocessor reads in all of your include files and the source code you are compiling and creates a
preprocessed version of your source code. This preprocessed version has all of its macros and constant
symbols replaced by their corresponding code and value assignments. If your source code contains any
conditional preprocessor directives (such as #if), the preprocessor evaluates the condition and modifies your
source code accordingly.

Here is an example of a program that uses the preprocessor extensively:

#include <stdio.h>
#define TRUE         1
#define FALSE        (!TRUE)
#define GREATER(a,b) ((a) > (b) ? (TRUE) : (FALSE))
#define PIG_LATIN    FALSE
void main(void);
void main(void)
{
     int x, y;
#if PIG_LATIN
     printf("Easeplay enternay ethay aluevay orfay xnay: ");
     scanf("%d", &x);
     printf("Easeplay enternay ethay aluevay orfay ynay: ");
     scanf("%d", &y);
#else
     printf("Please enter the value for x: ");
     scanf("%d", &x);
     printf("Please enter the value for y: ");
     scanf("%d", &y);
#endif
     if (GREATER(x,y) == TRUE)
     {
#if PIG_LATIN
          printf("xnay islay eatergray anthay ynay!\n");
#else
          printf("x is greater than y!\n");
#endif
     }
     else
     {
     #if PIG_LATIN
          printf("xnay islay otnay eatergray anthay ynay!\n");
#else
          printf("x is not greater than y!\n");
#endif
     }
}

This program uses preprocessor directives to define symbolic constants (such as TRUE,  FALSE, and PIG_LATIN),
a macro (such as GREATER(a,b)), and conditional compilation (by using the #if statement). When the
preprocessor is invoked on this source code, it reads in the stdio.h file and interprets its preprocessor
directives, then it replaces all symbolic constants and macros in your program with the corresponding values
and code. Next, it evaluates whether  PIG_LATIN is set to TRUE and includes either the pig latin text or the plain
English text.

If PIG_LATIN is set to FALSE, as in the preceding example, a preprocessed version of the source code would
look like this:

/* Here is where all the include files
   would be expanded. */
void main(void)
{
     int x, y;
     printf("Please enter the value for x: ");
     scanf("%d", &x);
     printf("Please enter the value for y: ");
     scanf("%d", &y);
     if (((x) > (y) ? (1) : (!1)) == 1)
     {
          printf("x is greater than y!\n");
     }
     else
     {
          printf("x is not greater than y!\n");
     }
}

This preprocessed version of the source code can then be passed on to the compiler. If you want to see a
preprocessed version of a program, most compilers have a command-line option or a standalone preprocessor
program to invoke only the preprocessor and save the preprocessed version of your source code to a file. This
capability can sometimes be handy in debugging strange errors with macros and other preprocessor
directives, because it shows your source code after it has been run through the preprocessor.